XKLAMP
7484531172 mirror – Compatible with Renault Trucks T High
7484531172 mirror – Compatible with Renault Trucks T High
7484531172 mirror – Description
7484531172 MIRROR
Compatible with Renault Trucks T High Series / T Series / C Series / K Series
Description
7484531172 mirror is an exterior mirror unit identified by OE reference 7484531172 and used on vehicles compatible with Renault Trucks T High Series, T Series, C Series, and K Series. It supports stable rearward visibility during lane positioning, coupling operations, and stop-start distribution routes. Fitment should be confirmed by OE reference and mounting configuration before ordering.
When a mirror shows vibration blur, cracked housing, or reduced reflective clarity after impact, replacing the unit helps restore a clear line of sight. Verify the mounting pattern, seating surfaces, and any adjustment points against the removed mirror before installation to avoid mismatch across similar mirror assemblies.
During installation, tighten fasteners evenly so the housing sits flush and holds position under wind load. After fitting, adjust the viewing angle and complete a short road test; correct seating reduces drift and keeps the 7484531172 mirror aligned during long-haul vibration exposure.
Packaging data supports logistics planning: 1 unit per box, listed packing weight 2.66 kg, and pallet quantity listed as 0 for shipment-specific consolidation.
- compatible with Renault Trucks T High Series
- compatible with Renault Trucks T Series
- compatible with Renault Trucks C Series
- compatible with Renault Trucks K Series
Bulk Purchase Benefits
For fleet workshops and distributors, stock by OE reference and separate mirror variants by mounting configuration. Clear bin labels reduce picking errors when multiple mirror assemblies share similar housings across vehicles compatible with Renault Trucks T High / T / C / K.
DIY Replacement Guide
Service Steps:
- Park safely and stabilize the mirror assembly to prevent sudden movement.
- Confirm OE reference 7484531172 on the removed unit and compare mounting configuration.
- Remove fasteners while supporting the mirror body; avoid stressing the arm or bracket.
- Clean the seating surface and inspect for distortion at fixing points.
- Install the replacement mirror and tighten evenly so the housing sits flush.
- Adjust from the driver position and confirm stable alignment on a short road test.
Compliance Statement
• Supplied as a replacement component where OE reference and mounting configuration match the application.
• Intended for use on vehicles compatible with Renault Trucks where the mounting geometry is the same.
• Fitment should be confirmed by OE reference and mounting configuration before ordering.
Compartilhar
