9418205261 head lamp is specified as a right-side front lighting assembly with fog function, suitable for MERCEDES-BENZ Actros first-generation trucks and compatible with MERCEDES-BENZ Axor and Axor 2 vehicles that share the same front-end lamp architecture. Defined in catalogues as a manual, left-hand-traffic lamp with E-mark compliant optics and supplied without bulbs, this unit accepts standard 24 V H4/H1 halogen light sources for dipped and main beam while integrating a dedicated fog section for improved visibility in poor weather.

The 9418205261 head lamp uses a robust housing and carefully profiled lens to follow the original styling of compatible MERCEDES-BENZ Actros and Axor cabs, ensuring that the right-hand lamp aligns smoothly with the bumper, grille and corner trims. Internal reflector geometry is tuned to provide a controlled dipped-beam cut-off, strong main-beam reach and a wide, low fog pattern when correctly aimed, helping long-haul and regional trucks maintain safe visibility during night operation, heavy rain or fog.

In many professional parts catalogues this 9418205261 head lamp is linked to cross references such as 9418202661 / A9418202661 / A9418205261 / 0301081122 / 0301081320 / 0301081118, representing different numbering systems for the same family of right-hand headlamps suitable for MERCEDES-BENZ heavy-duty applications. Using 9418205261 as the primary identifier allows wholesalers and fleet maintenance teams to consolidate ordering while still recognising these widely used equivalent references.

For operators running compatible MERCEDES-BENZ Actros, Axor and Axor 2 fleets, the 9418205261 head lamp offers a practical replacement solution that supports consistent vehicle appearance, predictable lighting performance and simplified stock management. When fitted with quality bulbs, sealed correctly and inspected at regular intervals, this assembly can deliver long service life under demanding highway, distribution and construction duty cycles.

• Right-hand manual-adjust head lamp with integrated fog light section, suitable for MERCEDES-BENZ Actros and compatible with MERCEDES-BENZ Axor and Axor 2 truck platforms.
• Halogen H4/H1 configuration with separate reflector regions for dipped beam, main beam and fog function, supporting safe night driving for compatible heavy commercial vehicles.
• Designed to match OE mounting points and fascia lines, allowing the 9418205261 head lamp to seat correctly in the right front aperture without modification on suitable MERCEDES-BENZ trucks.
• Supplied without bulbs so fleets can standardise on their preferred 24 V halogen types within regulatory limits while keeping service flexibility across Actros and Axor models.

• Use the 9418205261 head lamp as a core stock code for right-hand lamps suitable for MERCEDES-BENZ Actros and compatible with Axor and Axor 2, while still listing cross references in catalogues and labels.
• Combine 9418205261 head lamp units with matching left-hand lamps and rear lights in palletised sets, allowing distributors to offer complete lighting packages for compatible MERCEDES-BENZ fleets.
• Clearly print “suitable for MERCEDES-BENZ Actros / compatible with MERCEDES-BENZ Axor” on cartons and documentation so technicians can instantly confirm applications in busy workshops.
• Plan safety stock of 9418205261 head lamp assemblies based on accident frequency and front-end exposure for long-haul and regional trucks, reducing downtime when unplanned repairs are needed.
• Support key accounts by offering stable lead times and consistent quality on this reference, helping them maintain reliable lighting across mixed compatible MERCEDES-BENZ vehicle generations.

• Secure the compatible MERCEDES-BENZ Actros or Axor truck on level ground, apply the parking brake and isolate the electrical system before working on the 9418205261 head lamp or its wiring.
• Remove the grille and right-hand bumper or corner trims that obstruct access to the headlamp fixing points, supporting the old lamp as fasteners are removed to prevent stress on the front panel.
• Disconnect the main lighting connector and fog-lamp wiring, checking terminals and seals for corrosion or water ingress; restore any damaged sections before fitting the replacement head lamp.
• Place the new 9418205261 head lamp into the right-hand aperture, aligning brackets and guide pins with OE mounting points on the cab, then tighten fasteners evenly until the lamp sits flush with surrounding trim.
• Install approved 24 V H4/H1 bulbs and fog-light bulbs, reconnect all wiring and restore power; finally, use beam-setting equipment to align dipped, main and fog beams in line with local regulations for suitable or compatible MERCEDES-BENZ vehicles.

• Primary reference: 9418205261 – right-hand head lamp with fog suitable for MERCEDES-BENZ Actros and compatible with Axor and Axor 2 trucks.
• Often cross-referenced with 9418202661 / A9418202661 / A9418205261 and aftermarket codes 0301081122, 0301081320 and 0301081118 in professional catalogues.
• Typical applications include Actros MP1 era trucks from around 1996 onwards and compatible Axor / Axor 2 models introduced in the early 2000s for European heavy-duty use.

The 9418205261 head lamp is supplied as a replacement right-side lighting assembly suitable for MERCEDES-BENZ Actros and compatible with MERCEDES-BENZ Axor and Axor 2 trucks, and when installed with appropriate bulbs and correctly aimed, is designed to support E-mark style road lighting performance in many commercial vehicle markets.

• Halogen H4/H1 optical design provides a defined dipped-beam cut-off, focused main-beam reach and a wide, low fog pattern to improve visibility in adverse weather for drivers of compatible heavy trucks.
• Durable housing, lens and reflector materials are selected to handle vibration, stone impacts and environmental exposure typical of long-distance haulage and construction-related operation.
• When combined with regular inspection and maintenance routines, the 9418205261 head lamp contributes to consistent lighting reliability and appearance on suitable or compatible MERCEDES-BENZ vehicle platforms.

All installation, aiming and maintenance work should follow local regulations and established workshop practices for vehicles suitable for or compatible with MERCEDES-BENZ Actros, Axor and Axor 2 model ranges.