504020193 head lamp – Compatible with IVECO Eurocargo II/III 2003-2008

504020193 head lamp – Description

504020193 head lamp is an aftermarket replacement head lamp used for commercial vehicle service where consistent visibility and stable mounting matter. The 504020193 head lamp is listed for vehicles compatible with IVECO Eurocargo II (EU, 2003), compatible with IVECO Eurocargo III (EU, 2008), and compatible with IVECO Stralis (EU, 2002), supporting routine repairs and planned maintenance cycles.

For mixed-duty operators, the 504020193 head lamp is also relevant to vehicles compatible with IVECO Crossway (BUS, EU, 2006), compatible with IVECO Arway (BUS, EU, 2005), and compatible with IVECO Other Bus Series (BUS, EU, 1970). The 504020193 head lamp helps keep service time predictable when technicians confirm connector seating, mounting points, and final aiming after tightening.

To reduce returns, the 504020193 head lamp should be matched by vehicle configuration and installation position before dispatch. In distribution environments, clear labeling and consistent part-number recording make it easier to reorder the 504020193 head lamp across multiple depots, especially when fleets run several model lines under the same maintenance schedule.

Logistics note: the 504020193 head lamp is packed 1 unit per box with a packing weight of 2.96 kg and quantity in pallet listed as 19 for pallet planning. Keeping the 504020193 head lamp in inventory supports faster turnaround during inspections, seasonal checks, and day-to-day repair work for commercial fleets.

MOQ: 50 units
B2B Terms: NET 30
Volume Pricing: >100 units: 12% discount

Packing Weight: 2.96 KG
Quantity in Box: 1
Quantity in Pallet: 19

Bulk-ready supply: warehouse-friendly boxing, pallet planning support, and consolidated shipping for 504020193 head lamp orders compatible with IVECO fleet service.

■ Symptom-Based Replacement
■ Reduced visibility, unstable aiming, or damaged lens/housing
■ Moisture signs or repeated vibration loosening

Steps (workshop-friendly):
1) Park safely, switch off ignition, and disconnect the battery negative terminal.
2) Remove trim/grille sections as required for access.
3) Unplug the connector and inspect terminals.
4) Remove fasteners while supporting the unit.
5) Install evenly, tighten, test function, then complete final aiming.

• Supplied as an aftermarket replacement component for maintenance and repair use.
• Fitment control: confirm vehicle configuration and installation position prior to ordering; vehicle-ID checking is recommended for mixed fleets.
• Brand names and reference numbers are used for compatibility identification only.

Compatible with IVECO Eurocargo II (2003), compatible with IVECO Eurocargo III (2008), compatible with IVECO Stralis (2002), compatible with IVECO Crossway (2006), compatible with IVECO Arway (2005), compatible with IVECO Other Bus Series (1970).