0008101579 mirror is an outside mirror assembly reference for vehicles compatible with MERCEDES-BENZ ATEGO (1998–), compatible with MERCEDES-BENZ ATEGO 2 (2004–), compatible with MERCEDES-BENZ AXOR (2001–), and compatible with MERCEDES-BENZ AXOR 2 (2004–). This reference is commonly catalogued as a side-specific main mirror variant, so side (RH/LH) and the mounting configuration should be confirmed before installation.

OE references covered in this listing include 0008101579, 0008102179, 0008101479S, A0008101479S, A0008101579, A0008102179. Using a complete reference set helps workshops and warehouses reduce picking errors when multiple mirror variants exist across cab generations and model years.

In daily operation, mirror stability is influenced by vibration, airflow load, and repeated door cycles. During replacement, compare the removed unit against the new assembly by overall shape, mounting points, and bracket geometry. If the mirror configuration on the vehicle includes electrical features, verify connector type and routing to avoid pinched wiring, then confirm the mirror holds position after a short road test.

For storage and dispatch, packing weight is 3.20 KG with 1 unit per box and 25 units per pallet. The 0008101579 mirror may have an opposite-side counterpart with a different reference, so pairing purchases should be controlled by OE reference matching and a direct mounting comparison on the vehicle.

• Warehouse-friendly format: 1 unit per box, 25 units per pallet for predictable handling.
• Clear OE-led picking helps reduce returns by keeping 0008101579 grouped with cross references used in catalogs.
• Consistent packaging weight control (3.20 KG) supports route planning and mixed-SKU shipment consolidation.
• Workshop efficiency: reference-based stocking reduces downtime when mirrors are replaced as part of safety inspections.
• Useful for fleet maintenance planning on vehicles compatible with MERCEDES-BENZ ATEGO / AXOR platforms.

1. Park on level ground, apply the parking brake, and switch off ignition power.
2. Support the mirror assembly to prevent sudden movement while removing fasteners.
3. Remove the existing mirror and compare bracket geometry, mounting points, and overall shape to the replacement.
4. If electrical functions are present on the vehicle, check connector compatibility and route wiring away from pinch points.
5. Install the new unit, tighten evenly, and confirm the mirror holds position after door operation.
6. Road-check at low speed to confirm stability, then re-check fasteners during the next routine inspection.

For best results, match by OE reference and verify the mounting configuration on the vehicle before final tightening, especially when multiple mirror variants exist within the same series.

This page is written for aftermarket identification and service use based on OE reference mapping and practical fit checks.

• Reference identification: 0008101579, 0008102179, 0008101479S, A0008101479S, A0008101579, A0008102179.
• Fit control: confirm side (RH/LH) and mounting geometry prior to installation.
• Service intent: designed for stable positioning under commercial vehicle operating conditions when correctly installed.

Fitment should be confirmed by OE reference and mounting configuration before ordering.

Compatible with MERCEDES-BENZ ATEGO, compatible with MERCEDES-BENZ ATEGO 2, compatible with MERCEDES-BENZ AXOR, compatible with MERCEDES-BENZ AXOR 2.