22239250 xenon headlamp – Description

22239250 xenon headlamp is a left-hand, LHD, manual-adjust headlamp assembly with a black base, factory-style xenon projector and integrated ballast, supplied without bulbs. It is designed for vehicles suitable for and compatible with VOLVO FH (4) and FM (4) model ranges introduced around the 2012 production year, where a non-AFS xenon headlamp is required to restore both styling and night-time visibility.

In OE documentation the 22239250 xenon headlamp is linked to cross-reference 21221146, and appears in the same functional group as 22239253, 24159385, 21221136, 21221138, 22239247, 22239257, 22239251 and 84170243 for service coverage on trucks suitable for and compatible with VOLVO FH (4) and FM (4). Using 22239250 xenon headlamp as the primary stocking code helps consolidate these OE numbers into a single catalogue listing for left-side xenon applications.

Optically, the 22239250 xenon headlamp uses a projector module tuned to the cab geometry and ride height of vehicles suitable for and compatible with VOLVO FH (4) and FM (4). With a defined dipped-beam cut-off and powerful main-beam output when correctly aimed, it supports long-distance motorway work and demanding regional routes while maintaining oncoming driver comfort. The black base design integrates with modern bumper and grille styling, keeping repaired vehicles visually aligned with the original front-end design language.

A robust housing, durable mounting points and an integrated ballast platform make the 22239250 xenon headlamp a workshop-friendly choice for fleets operating tractors and rigids suitable for and compatible with VOLVO. When paired with approved xenon burners and installed to manufacturer-aligned procedures, this assembly helps maintain lighting performance, brand-compatible appearance and inspection-ready compliance over high annual mileage.

Bulk Purchase Benefits

For distributors and fleets that support vehicles suitable for and compatible with VOLVO FH (4) and FM (4), the 22239250 xenon headlamp is an ideal primary catalogue reference for left-side xenon applications. Using one master code to cover associated OE numbers such as 21221146 simplifies inventory structures and reduces the risk of picking errors in busy warehouses.

Outer cartons clearly printed with 22239250 xenon headlamp details and key cross references help logistics teams identify the correct part quickly when assembling orders for workshops servicing trucks compatible with VOLVO. Reinforced packaging and individual lamp protection reduce transport-related damage, minimising returns and ensuring units can move straight from shelf to service bay.

Larger fleets operating significant volumes of FH (4) and FM (4) vehicles suitable for and compatible with VOLVO can incorporate 22239250 xenon headlamp into preventive maintenance plans, replacing ageing lamps in batches rather than waiting for failures. Centralised bulk purchasing improves price stability, streamlines supplier relationships and supports consistent lighting performance across multi-depot operations.

DIY Replacement Guide

Before working on the 22239250 xenon headlamp, park the vehicle suitable for and compatible with VOLVO FH (4) or FM (4) on stable, level ground, apply the parking brake and follow workshop safety policies. Because this is a xenon system with ballast, always switch off the lighting circuit and isolate the battery as required by your procedures to avoid electrical hazards.

At the front of the truck suitable for and compatible with VOLVO, remove any grille or trim pieces that cover the left-hand headlamp aperture. Support the lamp while undoing the mounting fasteners so that the housing does not drop or twist the wiring harness. Gently withdraw the old xenon headlamp, disconnect the main connector and any ballast-related plugs, and inspect terminals and seals for moisture or heat damage.

Position the new 22239250 xenon headlamp in a clean area and install the specified xenon burner and any ancillary bulbs recommended for vehicles compatible with VOLVO FH (4) or FM (4). Avoid touching the burner glass during installation. Reconnect the electrical connectors on the vehicle, ensuring each plug is fully seated and latched. Offer the new headlamp into the aperture, confirm that alignment pins and seals are correctly located, and tighten all mounting fasteners evenly.

Refit removed trim panels, restore power and test dipped beam, main beam, DRL (if applicable) and position/indicator functions according to the truck specification. On vehicles suitable for and compatible with VOLVO, final beam alignment of the 22239250 xenon headlamp must be set with a calibrated beam tester to meet local regulations. Recheck fixings and lighting performance after initial road use or at the next scheduled service.

Compliance Statement

The 22239250 xenon headlamp uses an E-marked xenon projector system and automotive-grade materials intended for long-term use on vehicles suitable for and compatible with VOLVO FH (4) and FM (4). When paired with regulation-approved xenon burners and correctly aimed, the lamp supports compliance with widely applied European dipped and main-beam requirements for heavy trucks.

The housing, ballast mounting and lens components are designed to withstand vibration, moisture and stone impact encountered by road tractors and rigids compatible with VOLVO under demanding duty cycles. Regular inspection of lens clarity, seals, wiring and ballast condition is recommended as part of scheduled safety and roadworthiness checks across professional fleets.

This left-hand xenon assembly is supplied as a service replacement for professional workshops and distributors working with vehicles suitable for or compatible with VOLVO FH (4) and FM (4). Final legal conformity depends on correct installation, the use of suitable xenon burners and full alignment with local lighting regulations and inspection standards.

Suitable for and compatible with VOLVO FH (4) & FM (4) – Left xenon headlamp