22239248 xenon headlamp – Description

22239248 xenon headlamp is a right-side, LHD, manual-adjust headlamp assembly with a black base and integrated xenon technology, supplied with ballast and without bulbs. It is engineered as a service replacement for vehicles suitable for and compatible with VOLVO FH (4) and FM (4) produced from around 2012, where a non-AFS xenon unit is specified on the right-hand side of the cab.

In OE documentation the 22239248 xenon headlamp is directly cross-referenced to 21221145, and is commonly grouped alongside related service numbers 22239254, 24159384, 21221135, 21221137, 22239244, 22239252 and 84170245 for xenon headlamp configurations on trucks suitable for and compatible with VOLVO FH (4) and FM (4). Using 22239248 xenon headlamp as the primary stocking code allows distributors to consolidate these references into one clear catalogue line.

The optical system of the 22239248 xenon headlamp is tuned to the bumper height and cab geometry of long-haul and regional tractors and rigids suitable for and compatible with VOLVO FH (4) and FM (4). A precise dipped-beam cut-off and strong main-beam reach help drivers maintain visibility on motorways, mountain routes and night-time distribution work, while respecting oncoming traffic thanks to clean beam control when correctly aimed.

With a durable housing, reinforced mounting points and a black base that integrates with contemporary front-end styling, the 22239248 xenon headlamp is ideal for fleet workshops maintaining vehicles suitable for and compatible with VOLVO. When installed with approved xenon burners and aligned using proper equipment, it supports consistent lighting performance and keeps repaired trucks visually aligned with the original manufacturer design language.

Bulk Purchase Benefits

Distributors and fleet operators serving vehicles suitable for and compatible with VOLVO FH (4) and FM (4) can simplify their xenon headlamp inventory by using 22239248 xenon headlamp as the main right-side reference. This single code covers multiple OE numbers, making catalogue management and warehouse picking more efficient during peak service periods.

Clearly labelled cartons featuring the 22239248 xenon headlamp designation and key cross references help warehouse teams quickly identify the correct lamp when preparing shipments to workshops that maintain fleets compatible with VOLVO. Protective internal packaging reduces transit damage, helping lamps move directly from storage shelves into service bays without rework or inspection delays.

Large logistics operators and long-haul fleets running mixed FH (4) and FM (4) units suitable for and compatible with VOLVO can incorporate 22239248 xenon headlamp into planned maintenance campaigns. Replacing ageing right-side lamps in batches improves nighttime visibility, keeps vehicle appearance consistent, and supports more predictable budgeting for lighting components.

DIY & Workshop Replacement Guide

Before working on the 22239248 xenon headlamp, park the truck suitable for and compatible with VOLVO FH (4) or FM (4) on level ground, apply the parking brake and follow site electrical isolation rules. Because this is a xenon system with ballast, always switch off the lighting circuit and disconnect the battery as required by your workshop safety procedures.

From the front of the vehicle compatible with VOLVO, remove any grille, corner trim or retaining panels that cover the right-hand headlamp aperture. Support the old lamp while loosening the mounting fasteners so the housing does not drop or twist the harness. Gently withdraw the headlamp, disconnect the main plug and ballast connections, and inspect terminals and seals for corrosion or moisture.

Prepare the new 22239248 xenon headlamp on a clean bench and install the specified xenon burner and any additional bulbs required by the configuration of trucks suitable for and compatible with VOLVO FH (4) and FM (4). Avoid touching the glass of the burner during assembly. Reconnect the vehicle-side connectors, making sure all plugs latch securely, then locate the lamp in the aperture with alignment pins and seals correctly seated before tightening fasteners evenly.

Refit removed trim, restore power and test dipped beam, main beam, DRL (if fitted) and indicator/position functions. On vehicles suitable for and compatible with VOLVO, final beam alignment of the 22239248 xenon headlamp must be checked with a calibrated beam setter against local regulations. Recheck fixings and lighting performance after initial road use or at the next scheduled service interval.

Compliance Statement

The 22239248 xenon headlamp uses an E-marked xenon projector system and automotive-grade plastics, seals and mounts suitable for demanding duty cycles on vehicles suitable for and compatible with VOLVO FH (4) and FM (4). When fitted with regulation-approved xenon burners and correctly aimed, it supports compliance with widely applied European dipped and main-beam lighting requirements for heavy trucks.

Its housing and lens are designed to resist vibration, temperature fluctuation and stone impact encountered by long-haul and regional distribution fleets compatible with VOLVO. Routine inspection of lens clarity, wiring integrity, ballast condition and beam aim should be included within fleet maintenance programmes and statutory safety checks.

This right-hand xenon assembly is offered as an aftermarket service replacement for professional workshops and distributors handling trucks suitable for or compatible with VOLVO FH (4) and FM (4). Achieving full regulatory compliance depends on correct installation, appropriate xenon burner selection and strict adherence to applicable national lighting regulations and inspection procedures.

Suitable for and compatible with VOLVO FH (4) & FM (4) – Right xenon headlamp