0035443303 taillamp is a right-side rear lamp assembly designed to provide tail and brake illumination for vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4 tractors and rigids. The lamp is supplied without bulbs and without buzzer, making it a clean rear-light solution for fleets that prefer visual signalling only, with maintenance teams free to select locally approved bulb types to match regional regulations.

According to cross-reference data, the 0035443303 taillamp is associated with additional catalogue numbers used on vehicles suitable for and compatible with MERCEDES-BENZ heavy trucks, including the secondary reference 0035447203 and its A-prefix counterparts A0035443303 and A0035447203. These links show that the same rear-lamp design is applied across vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4, Arocs and Antos platforms where identical mounting, wiring and signal functions are required on the right-hand rear corner.

The housing of the 0035443303 taillamp combines impact-resistant plastics, a shaped lens and sealed joints to cope with spray, dirt and vibration encountered by long-haul and construction trucks suitable for and compatible with MERCEDES-BENZ. When equipped with suitable bulbs, the reflector and lens geometry work together to deliver a clear, balanced tail and brake-light signature that remains visible in poor weather, night driving and yard manoeuvres.

Installed using the correct fixings and connected to the existing harness, the 0035443303 taillamp helps fleets operating vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4, Arocs and Antos maintain compliant rear lighting, a consistent visual appearance and dependable signalling performance across intensive duty cycles.

• Right-hand taillamp without buzzer, suitable for and compatible with MERCEDES-BENZ Actros MP4 rear lighting systems.
• 0035443303 taillamp is also listed for vehicles suitable for and compatible with MERCEDES-BENZ Arocs and Antos where an identical rear-lamp assembly is used.
• Supplied without bulbs so workshops can install approved lamp types that match fleet standards and local lighting regulations.
• Robust housing and lens design support long-term service on heavy trucks operating in mixed highway, construction and distribution environments.

• Adopt 0035443303 taillamp as the main stock reference for right-hand rear lamps on vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4, simplifying catalogue and bin labelling.
• Map 0035443303 together with cross references such as 0035447203 and A0035443303 in warehouse systems so parts teams can rapidly respond to service requests for trucks suitable for and compatible with MERCEDES-BENZ.
• Build paired left/right taillamp kits for fleet refurbishment programmes on vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4, Arocs and Antos tractors and rigids.
• Hold strategic stock in line with rear-impact and corrosion statistics to minimise downtime for vehicles suitable for and compatible with MERCEDES-BENZ heavy-duty platforms.
• Use neutral or private-label packaging that clearly states compatibility with MERCEDES-BENZ heavy trucks, supporting both wholesale distribution and e-commerce sales.

• Park the vehicle suitable for and compatible with MERCEDES-BENZ Actros MP4 on level ground, apply the parking brake and isolate electrical power according to workshop procedures before working on the 0035443303 taillamp.
• Access the right rear lamp area from behind the bumper or rear panel, removing any guards or trims as needed to expose the lamp fixings and connector without damaging clips or seals.
• Disconnect the harness plug, then inspect terminals, seals and wiring for signs of moisture, corrosion or mechanical damage; repair or replace affected components before fitting the new taillamp on vehicles suitable for and compatible with MERCEDES-BENZ trucks.
• Remove the old lamp, clean the mounting surface and position the 0035443303 taillamp so that all locating pins and gaskets seat correctly, then tighten fixings evenly to avoid distorting the housing or rear panel.
• Install approved bulbs, reconnect the harness, restore power and test tail and brake functions, confirming that the right rear-light signature is even and that no new lamp warnings are displayed to the driver.

• Primary reference: 0035443303 – right-hand taillamp without buzzer, suitable for and compatible with MERCEDES-BENZ Actros MP4 heavy trucks.
• Associated references include 0035447203 plus A-prefix codes A0035443303 and A0035447203 used across vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4, Arocs and Antos platforms.
• Applications cover long-haul, regional distribution and construction roles where clear rear signalling is essential for vehicles suitable for and compatible with MERCEDES-BENZ fleets.

The 0035443303 taillamp is manufactured using automotive-grade housings, lenses and sealing concepts appropriate for rear lighting systems on vehicles suitable for and compatible with MERCEDES-BENZ heavy trucks. When installed with approved bulbs and wired according to manufacturer-style guidelines, it is designed to support compliant rear-lighting performance in professional fleet use.

• Durable construction helps the lamp withstand vibration, spray and debris on vehicles suitable for and compatible with MERCEDES-BENZ Actros, Arocs and Antos models.
• All installation and inspection work should follow local lighting regulations and recognised commercial-vehicle workshop practices to ensure safe road operation.
• Regular checks of light output and lens condition support long-term reliability of the 0035443303 taillamp on vehicles suitable for and compatible with MERCEDES-BENZ fleets.

Service operations on this rear taillamp should be performed by qualified technicians familiar with lighting and electrical systems on trucks suitable for or compatible with MERCEDES-BENZ vehicles.