0035443203 taillamp is a left-side LED rear lamp designed for vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4 tractors and rigids. Using solid-state light sources in place of conventional bulbs, this taillamp provides a crisp, fast-responding rear signal that supports better visibility in highway, regional and construction operations, while also reducing maintenance downtime compared with traditional filament lamps.

Cross-reference information shows that the 0035443203 taillamp is linked to additional catalogue numbers used on vehicles suitable for and compatible with MERCEDES-BENZ heavy trucks, including the associated LED reference 0035447103 and A-prefix codes A0035443203 and A0035447103. These mappings confirm that the same LED rear lamp architecture is shared across vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs models where identical mounting points, connector layouts and signal functions are required.

The 0035443203 taillamp housing combines durable plastics, a sealed lens and integrated LED optics tuned for long service life on vehicles suitable for and compatible with MERCEDES-BENZ heavy-duty platforms. LEDs are arranged to deliver distinct tail and brake signatures, helping following drivers recognise vehicle movements quickly even in poor weather. Thanks to the lower power draw and vibration resistance of LED technology, fleets can achieve reduced energy consumption and fewer lamp-related service interruptions.

When correctly installed with suitable fixings, connected to the factory harness and checked using standard commercial-vehicle diagnostic procedures, the 0035443203 taillamp supports compliance with typical rear-lighting expectations for vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs. Its clear LED signature contributes to professional vehicle appearance and safety-focused fleet presentation on public roads and in demanding work sites.

• Left-hand rear LED taillamp suitable for and compatible with MERCEDES-BENZ Actros MP4, providing tail and brake-light functions in a solid-state lighting package.
• 0035443203 taillamp is also listed for vehicles suitable for and compatible with MERCEDES-BENZ Antos and Arocs models that share the same rear lamp design and LED electronics.
• LED light sources support rapid response, reduced energy consumption and extended service life compared with conventional bulb-based lamps on heavy trucks.
• Compact housing and connector arrangement are designed to integrate with existing rear panels and wiring on vehicles suitable for and compatible with MERCEDES-BENZ heavy-duty platforms.

• Standardise the 0035443203 taillamp as a primary LED rear lamp reference for fleets operating vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs trucks.
• Link 0035443203 with cross references such as 0035447103 and A0035443203 in warehouse systems so parts teams can quickly satisfy requirements for vehicles suitable for and compatible with MERCEDES-BENZ LED rear lighting.
• Offer LED upgrade or refurbishment packages built around the 0035443203 taillamp for operators transitioning mixed fleets of vehicles suitable for and compatible with MERCEDES-BENZ to longer-life rear lighting technology.
• Reduce unplanned downtime by holding strategic stock of 0035443203 taillamp units, especially in fleets that rely on vehicles suitable for and compatible with MERCEDES-BENZ tractors in intensive long-haul service.
• Use neutral or private-label packaging that clearly indicates compatibility with MERCEDES-BENZ heavy trucks, supporting both wholesale distribution and online parts catalogues.

• Park the vehicle suitable for and compatible with MERCEDES-BENZ Actros MP4 on level ground, apply the parking brake and isolate the electrical system according to workshop safety procedures before working on the 0035443203 taillamp.
• Access the left rear lamp position from behind the bumper or rear panel, removing guards or trims as required to expose fixings and the multi-pin connector without stressing wiring or seals.
• Disconnect the harness, then inspect terminals and seals for moisture or corrosion; clean or repair as necessary before installing the new LED taillamp on vehicles suitable for and compatible with MERCEDES-BENZ trucks.
• Remove the old unit, clean the mounting surface, and position the 0035443203 taillamp so that all locating pins and gaskets seat correctly, then tighten fixings evenly to avoid distorting the housing or rear panel.
• Reconnect the harness, restore power and test tail and brake functions, confirming that the LED pattern is even, bright and free from warning messages on the driver information display.

• Primary reference: 0035443203 – left LED taillamp suitable for and compatible with MERCEDES-BENZ Actros MP4 rear lighting systems.
• Associated reference: 0035447103 – linked LED taillamp code used in catalogues for vehicles suitable for and compatible with MERCEDES-BENZ Antos and Arocs as well as Actros MP4.
• A-prefix catalogue numbers such as A0035443203 and A0035447103 are also used to identify the same LED taillamp assembly on vehicles suitable for and compatible with MERCEDES-BENZ heavy trucks.

The 0035443203 taillamp is produced using automotive-grade LED technology, housings and lenses suited to rear lighting systems on vehicles suitable for and compatible with MERCEDES-BENZ heavy trucks. When installed according to manufacturer recommendations, it is designed to support compliant rear signalling performance for professional fleet operations.

• LED optics and robust construction help withstand vibration, spray and debris encountered by vehicles suitable for and compatible with MERCEDES-BENZ Actros, Antos and Arocs trucks.
• Installation and testing should follow local lighting regulations and recognised commercial-vehicle workshop guidance to ensure safe, legal road operation.
• Routine functional checks and visual inspection help maintain long-term reliability of the 0035443203 taillamp on vehicles suitable for and compatible with MERCEDES-BENZ fleets.

Service operations on this LED taillamp should be completed by qualified technicians familiar with electrical and lighting systems on trucks suitable for or compatible with MERCEDES-BENZ vehicles.