9738202761 head lamp is part of the MERCEDES-BENZ ATEGO / ATEGO II front lighting range and is used as a left headlight on medium-duty trucks built from the mid-2000s onward. In many catalogues it appears alongside references such as 9738202561 and 9738202661, indicating that it belongs to the same cab generation and shares key housing and optical features, while being allocated to specific side and configuration variants.

The 9738202761 head lamp is typically supplied as a 24-volt halogen assembly using H1 / H7 main and dipped beam bulbs plus a W5W position light, with a reflector and lens geometry optimised for right-hand-traffic operation when correctly aimed. The lamp body is designed to integrate with the ATEGO front module introduced around 2004, so it sits flush with the grille and corner trims and maintains the clean, modern appearance of the cab even after collision repairs or age-related lens wear.

Mounting points, adjustment screws and the electrical connector on the 9738202761 head lamp follow the same pattern as other ATEGO II headlamps, making it straightforward for workshops and fleet maintenance teams to replace damaged units using familiar procedures and tools. Because the reference is part of a widely used headlight family, distributors can stock it alongside companion part numbers for the right-hand side and any integrated fog-lamp options, simplifying inventory control while still covering a broad range of vehicles.

For operators running MERCEDES-BENZ ATEGO in city logistics, regional transport or service-vehicle roles, keeping at least one 9738202761 head lamp in local stock helps minimise downtime after front-end impacts or inspection failures, and supports consistent lighting performance and fleet appearance across different duty cycles.

• Use the 9738202761 head lamp as your primary left-hand reference for MERCEDES-BENZ ATEGO / ATEGO II front lighting, pairing it with matching right-side lamps under a single product family in your catalogue.
• Plan palletised shipments that combine 9738202761 head lamp units with related ATEGO lamps and front-end panels, giving distributors and workshops complete collision-repair solutions in one consignment.
• Standardise export packaging so 9738202761 head lamp cartons carry clear OE and application information, enabling fast identification and picking in busy truck-parts warehouses.
• Base stocking levels for the 9738202761 head lamp on real fleet usage data from regional and municipal ATEGO operators, ensuring availability during seasonal damage peaks without excessive inventory.
• Offer the 9738202761 head lamp within tiered product ranges so customers can choose between value-oriented and premium options while retaining identical fitment and geometry on MERCEDES-BENZ trucks.

• Park the MERCEDES-BENZ ATEGO on level ground, secure the parking brake and isolate the vehicle’s 24-volt system according to workshop safety procedures before handling the 9738202761 head lamp or related wiring.
• Remove the grille and any required left-hand bumper or corner panels to expose headlamp fasteners, supporting the old lamp as you undo screws to avoid stressing plastic panels and paintwork.
• Withdraw the existing lamp carefully from the front module, disconnect the electrical connector and inspect terminals, seals and harness routing for corrosion, overheating or chafing before installing the replacement headlamp.
• Offer the new 9738202761 head lamp into the aperture, aligning locator tabs, studs and guides with MERCEDES-BENZ mounting points and tightening fixings evenly so the housing sits square in the opening.
• Install the correct H1 / H7 bulbs if they are supplied separately, reconnect the wiring and restore power; finally, use a headlight aiming device to adjust dipped and main-beam patterns to comply with local heavy-vehicle lighting regulations.

• Primary OE reference: 9738202761 – left head lamp associated with MERCEDES-BENZ ATEGO and ATEGO II medium-duty trucks that share the 2004-on cab family.
• Formatted catalogue variants may include 973 820 27 61 or 973-820-2761, all pointing back to the same left headlamp family when cross-referenced in commercial-vehicle parts databases.
• In practical use, the 9738202761 head lamp is often stocked together with right-hand references from the same series so that both sides of the vehicle can be restored after front-end damage with matching components.

The 9738202761 head lamp is intended as a service replacement left headlight for MERCEDES-BENZ ATEGO / ATEGO II trucks and, when correctly matched, installed and aimed, is designed to support road-legal lighting performance in relevant markets.

• Halogen reflector and lens design provide a controlled dipped-beam cut-off and effective main-beam reach that supports safe operation for medium-duty trucks in night-time and low-visibility conditions.
• Housing and lens materials are selected to tolerate vibration, stone impact and adverse weather, helping the 9738202761 head lamp maintain clarity and mechanical stability across extended duty cycles.
• Connector and sealing arrangements are designed to limit moisture and dust ingress, reducing the likelihood of electrical faults when lamps are included in regular inspection and maintenance schedules.

Installed by trained personnel and checked periodically, the 9738202761 head lamp helps keep MERCEDES-BENZ ATEGO fleets safe, visible and professional in daily operation.