9618208561 head lamp is configured as a left-hand Xenon unit for 24 V systems, without daytime running light and supplied without bulbs, suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs series vehicles. Its optical layout is designed to deliver a strong dipped-beam cut-off and focused main-beam reach on long-haul, regional and construction routes when correctly aimed on LHD chassis.

Professional truck-parts catalogues frequently associate this lamp family with earlier references such as 9608201839, confirming that the housing, fixing points and connector positions follow the same envelope for cabs suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs. This means the 9618208561 head lamp can be used as a direct left-side replacement assembly where the original unit has suffered stone impact, water ingress or reflector ageing, while keeping front-end styling and beam geometry within expected tolerances.

Across fleets operating tractors and rigids suitable for and compatible with MERCEDES-BENZ Actros MP4 (from about 2011), Antos (from about 2012) and Arocs (from about 2013), the 9618208561 head lamp helps standardise parts stocking on demanding mixed-duty operations. Using a consistent lamp reference reduces picking errors, simplifies export documentation and supports efficient maintenance planning, especially when combined with clearly labelled packaging and digital catalogue data.

When installed with quality Xenon light sources, sealed correctly against moisture and included in regular inspection and beam-aim routines, the 9618208561 head lamp supports safe, reliable night-time visibility and a professional front appearance on vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs platforms in European markets.

• Manual left Xenon head lamp without DRL or bulbs, suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs heavy trucks in the approximate 2011–2018 production range.
• Optics of the 9618208561 head lamp are configured for a crisp dipped-beam pattern and defined main-beam reach when correctly aimed on LHD vehicles.
• Housing geometry follows cab contours and mounting points suitable for and compatible with MERCEDES-BENZ Actros MP4 / Antos / Arocs, helping the lamp sit flush with bumper and grille assemblies.
• Designed for 24 V commercial-vehicle lighting systems and intended for integration with appropriate Xenon control gear on compatible MERCEDES-BENZ platforms.

• Adopt the 9618208561 head lamp as the primary left Xenon reference for fleets suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs to simplify warehouse stocking.
• Use cross-references like 9608203039, 9608203239 and 9618204639 in catalogues for data completeness while keeping 9618208561 as the lead code on labels and cartons.
• Prepare paired repair kits combining the 9618208561 head lamp with the corresponding right-side lamp for distributors supporting vehicles compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs.
• Plan buffer stocks based on incident statistics and refurbishment policies to ensure head lamps are available when key tractors and rigids enter workshops.
• Offer private-brand packaging and EDI catalogue data so international partners can promote this lamp in product lines suitable for and compatible with MERCEDES-BENZ heavy truck fleets.

• Park the vehicle suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos or Arocs on level ground, apply the parking brake and isolate the electrical system before touching the 9618208561 head lamp or wiring.
• Remove grille panels and left-front bumper or corner trims as required to reach the lamp fixings, supporting the old lamp as you undo fasteners so the cab structure is not strained.
• Disconnect the multi-pin connector and any Xenon control connections, inspecting terminals and seals for corrosion or overheating; repair or replace damaged sections before installing the new lamp.
• Position the 9618208561 head lamp in the aperture so its guides and brackets align with factory points on cabs suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs, then tighten fasteners evenly to seat the unit correctly.
• Fit approved Xenon bulbs and associated components, reconnect wiring and use professional headlight aiming equipment to set beam patterns in line with local heavy-vehicle regulations.

• Primary reference: 9618208561 – left Xenon head lamp without DRL, suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs trucks.
• Secondary references (single mentions): 9608201839, 9618207261, 9608203039, 9608203239, 9618204639, used across various aftermarket catalogues for related lamp variants and cross-links.
• Typical applications include heavy-duty vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4 (around 2011–2018), Antos (from around 2012) and Arocs (from around 2013) in European markets.

The 9618208561 head lamp is supplied as a left-hand Xenon replacement assembly suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs models and, when installed with the correct light sources and properly aimed, is intended to support safe forward illumination on heavy vehicles.

• Optical performance is designed to provide a controlled dipped-beam cut-off and efficient main-beam spread to meet typical E-mark based headlamp requirements when correctly installed.
• Housing, lens and internal components are engineered to withstand vibration, stone impact and severe weather conditions encountered by trucks suitable for and compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs duty cycles.
• Integrated into normal inspection, cleaning and aim-check routines, the 9618208561 head lamp supports consistent lighting performance and a professional front-end appearance for high-mileage fleets.

All installation, adjustment and maintenance must follow applicable local regulations and recognised workshop practices for vehicles suitable for or compatible with MERCEDES-BENZ Actros MP4, Antos and Arocs platforms.