9618205239 head lamp is a left-hand Xenon lighting unit designed as a service replacement for vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4 tractors and rigids. Supplied without bulbs and featuring E-marked optics, this assembly supports 24 V Xenon systems and restores clear dipped and main-beam performance when the original lamp has suffered impact damage, reflector ageing or lens hazing.

On compatible cabs in the MERCEDES-BENZ Actros MP4 family, the 9618205239 head lamp follows the original front-end styling so it sits flush with bumper, grille and side trims once correctly installed. The Xenon dipped beam provides a crisp cut-off to reduce glare for oncoming traffic, while the main beam delivers focused forward reach for highway, regional and yard manoeuvring duties. When correctly aimed, this head lamp helps drivers of vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4 maintain safe visibility in night and low-light conditions.

Professional catalogues often list the 9618205239 head lamp alongside the cross reference A9618205239, describing the same left-side Xenon lamp family suitable for and compatible with MERCEDES-BENZ Actros MP4 applications. Using 9618205239 as the primary ordering code allows wholesalers, exporters and workshops to maintain clear stock control while still mapping this alternative reference internally for data, label and carton management.

For fleets running suitable and compatible MERCEDES-BENZ Actros MP4 tractors and rigids in long-haul, regional logistics or construction-support operations, the 9618205239 head lamp offers a practical combination of Xenon output, durability and maintainability. Installed with quality Xenon bulbs, matched control gear and supported by regular cleaning, inspection and beam-adjustment routines, this head lamp can deliver consistent, professional lighting performance across intensive European duty cycles.

• Left-side Xenon head lamp without bulbs and with E-marked optics, suitable for and compatible with MERCEDES-BENZ Actros MP4 trucks built approximately between 2011–2018.
• Optical system configured to deliver a sharp dipped-beam cut-off and focused main-beam reach when the 9618205239 head lamp is correctly installed and aimed.
• Housing and lens geometry matched to cab designs suitable for and compatible with MERCEDES-BENZ Actros MP4, helping the lamp integrate smoothly with bumper and grille lines.
• Designed for 24 V Xenon systems, using existing wiring layouts on heavy trucks compatible with MERCEDES-BENZ Actros MP4 platforms.

• Use the 9618205239 head lamp as a primary stock reference for left Xenon lamps suitable for and compatible with MERCEDES-BENZ Actros MP4 fleets, simplifying warehouse identification.
• Combine 9618205239 head lamp units with the corresponding right-hand Xenon lamps in palletised repair kits for distributors serving vehicles compatible with MERCEDES-BENZ Actros MP4.
• Print carton text such as “suitable for MERCEDES-BENZ Actros MP4, 2011–2018, left Xenon head lamp, without bulbs” to support quick confirmation of applications in busy storerooms.
• Plan safety stock levels for the 9618205239 head lamp based on front-end impact rates and preventative-refurbishment programmes to reduce downtime in long-haul and regional fleets.
• Offer private-label packaging, barcodes and electronic data so partners can position this lamp in their product ranges suitable for and compatible with MERCEDES-BENZ Actros MP4 vehicles.

• Park the truck suitable for and compatible with MERCEDES-BENZ Actros MP4 on level ground, apply the parking brake and isolate the electrical system before working on the 9618205239 head lamp or any Xenon components.
• Remove the grille and left-hand bumper or fascia trims that obstruct access to the lamp fixings, supporting the existing head lamp as fasteners are loosened to avoid stressing the cab front structure.
• Disconnect the main connector and Xenon-related wiring, inspecting terminals and seals for corrosion, moisture or heat damage; repair or replace compromised harness sections before fitting the new unit.
• Position the 9618205239 head lamp in the left aperture so guide pins and brackets align with mounting points on cabs suitable for and compatible with MERCEDES-BENZ Actros MP4, then tighten fixings evenly until the lamp sits flush.
• Install approved Xenon bulbs and verify that ballasts and associated control gear match the lamp specification, reconnect wiring and use headlamp aiming equipment to set beams according to local regulations.

• Primary reference: 9618205239 – left-hand Xenon head lamp without bulbs suitable for and compatible with MERCEDES-BENZ Actros MP4 trucks.
• Secondary reference (single mention): A9618205239, used in some catalogues to describe the same Xenon lamp family.
• Intended for use on heavy-duty vehicles suitable for and compatible with MERCEDES-BENZ Actros MP4 model ranges from approximately 2011–2018, subject to cab and lighting specification.

The 9618205239 head lamp is supplied as a left-side Xenon replacement assembly suitable for and compatible with MERCEDES-BENZ Actros MP4 trucks and, when installed with appropriate bulbs and correctly aimed, is designed to support safe forward lighting on heavy vehicles.

• Optical design delivers a defined dipped-beam cut-off and focused main-beam pattern to help drivers of vehicles compatible with MERCEDES-BENZ Actros MP4 maintain clear visibility at night.
• Durable housing, lens and internal components are specified to withstand vibration, stone impact and harsh weather encountered in long-haul and regional freight operations.
• When integrated into routine inspection, cleaning and beam-aim checks, the 9618205239 head lamp supports stable lighting quality and a consistent professional appearance for fleets suitable for and compatible with MERCEDES-BENZ Actros MP4 trucks.

All installation, alignment and maintenance work should follow applicable local regulations and recognised workshop practices for vehicles suitable for or compatible with MERCEDES-BENZ Actros MP4 ranges.